| |
Our BLINDER M27 X-TREME:
BLINDER is happy to present the M27 X-TREME:
When the ignition is turned on, the upstart self-test function (STF) will tell you that the BLINDER is ready. BLINDER is on stand-by until a police laser gun or one of the automatically photo laser speed traps hits the car. Now the BLINDER starts to do its job.
The Laser Warning System (LWS) tells the driver, that a laser gun is operating near him. He may want to slow down. The Infra Red Detectors transmit the incoming laser pulse frequency to the built-in computer. The optimal jamming pulse (APS) is now selected.
*Important Note*
Because the jamming pulse is transmitted only when the laser gun is active, it has become possible to apply an extremely powerful return-jamming pulse signal. The police laser gun or photo trap cannot measure the speed, and the driver can continue without a speeding ticket.
What's New:
- The M27 & M47 come with a more powerful platform based on a new central CPU that controls user settings, software updates, synchronization of all transponders and communication.
- Improved detection and jamming function (hardware & Software)
- PC software updateable (via USB port on the CPU module)
- The BLINDER Update Software also allows the user to change system settings like upstart behaviours, jamming period and more.
- Free software downloads from BLINDER web site (Including e-mail upgrade notification service)
- Multi-function System (user can easily select modes: parking sensor or garage door opener/jamming mode by a new 3-postion switch)
|
The BLINDER M27 X-TREME is an advanced multi-purpose laser system: |
|
The BLINDER M27 X-TREME comes with: |
-
2 Infrared transponder modules provide front and rear laser jamming protection including both the front headlights and number plate regions.
-
1 Central Processing Unit
-
1 CPU wiring kit
-
1 Mounting kit for 2 x Transponder Units
|
Unique BLINDER product advantages: |
-
BLINDER 13 years experience as market leader
-
Internet upgradable software guarantees protection against future laser speed traps USB interface makes DIY upgrades a snap!
-
User definable modes
-
Detects all laser guns made today in Europe, Asia, Australia and USA/Canada *Important Note*
-
Protects against speed laser traps (Patented Stealth mode jamming)
-
New Custom High Powered infrared LED's to give optimal jamming performance
-
Responds only to actual speed lasers (no false alerts).
-
Audible & Visual Alerts
-
Discreet front and / or rear install on any vehicle or motor bike
-
2 years warranty
|
Performance
|
- Internal self test function guarantees reliable protection when operating.
-
BLINDER is designed to remain stealthy and avoid producing jamming codes on speed guns.
-
The transponder modules are small and blend aesthetically in with the front bodywork of your vehicle making them difficult notice.
-
BLINDERs infrared laser pulses are arguably the strongest available anywhere for non-military use.
-
Designed to jam all police laser guns on the market from any distance all the way to the laser gun
-
Provides enough time for the driver to slow down before the jammer is deactivated by the driver, or automatically switches off after a pre-set elapsed time has expired.
-
This unit scans constantly for police laser guns or laser speed cameras and then computes the laser pulse rate and sends back within milliseconds a specially designed counter laser signal especially designed for that make of police laser gun. The result will confuse the LIDAR causing the speed readout to remain blank while you adjust your speed accordingly.
-
Additional functions include parking sensor, garage door opener, gate & drive way light activator. (additional module required)
Videos & Testing:
Take a look at BLINDER Videos & the results of Independent testing in USA. Remember, you only need time to cut your speed by a few kilometers per hour which would only take a few seconds.
|
What's in the BLINDER Box:
The BLINDER M27 X-TREME comes with: |
-
2 Infrared transponder modules provide front and rear laser jamming protection including both the front headlights and number plate regions.
-
1 Central Processing Unit
-
1 CPU wiring kit
-
1 Mounting kit for 2 x Transponder Units
|
|
|
"BLINDER could save you money on my car insurance"
BLINDER Laser Products do not advocate exceeding the legal speed limit, and shall not be held responsible for any injuries that could occur due to improper installation or usage of the product.
Safety WARNING!
Do not look directly into the BLINDER M27 / M47 with the naked eye at close range.
You won’t see anything, but you might cause eye damage after prolonged exposure as the BLINDER M27 / M47 emits high-power infra red (IR) light, which is not visible to the human eye. Under no circumstances use a magnifying glass or lenses when looking at an active IR transponder. |
|
BLINDER M27 X-TREME Full Set:
BLINDER Accessories:
At BLINDER we try to think of everything.
To make your installation job easier we have included mounting brackets, one pair for each infrared transponder module, screws and nuts for mounting the CPU and modules. We've also included wiring connectors and wire ties to keep the job neat and tidy. We even included a bubble level to make sure that you set the transponders at the correct angle, nice and level.
BLINDER CPU & Transponder Modules:
If you buy a laser jammer, make sure it doesn't violate BLINDER Patents or you could be left with no spare parts and no backup service.
Hardware Installation:
If you're not the handyman type, you can have one our authorised installers do the work for you. You can pay for your installation at the same time as you purchase your BLINDER Laser System.
With all of these Laser Speed Cameras around, you're bound to gain a few demerit points even IF you can stick to the speed limit most of the time.
The down side to heavy speed enforcement on low level speeders is lost licence's, lost jobs, slower traffic flow and higher car insurance cost. So who wins? The government wins with bulging pockets full of your money!
|
|
